LCP Roof Sump Pan Kit – Product Comparison

roof drains, roof drain detail, Zurn roof drainand overflow, Jay R. Smith roof drain and overflow, roof drain pan, roof drain sump pans, roof drain pan detail, superior roof drain pans, custom roof drain pans, roof drain sump pan dimensions, sumped roof drain,
Model LCP roof drain sump pan kit will eliminate standing rainwater on your flat roof

Price Comparison

LSP roof drain sump pan flat roof drainage system is priced at around $825.00 to $875.00 plus shipping and quantity discounts.

Internet pricing for the double roof drain and sump receiver ranges from $650.00.- $1,000.00 and up + shipping + the labor and materials needed to build the wood sump box which could add another $200.00. The wood sump box would be needed in order to lower the assembly. That’s lost production and added unnecessary costs. 

The components that are included are the double sump pan, two 15″ commercial roof drains, primary and overflow and two hardware kits. The LCP kit includes two no-hub couplings.  



The roof drain sump receiver vs. the roof drain sump pan

JR Smith roof drain, JR Smith roof drain and overflow, Zurn roof drain, Zurn roof drain and overflow, Frank Pattern roof drain, Frank Pattern roof drain and overflow, roof drain detail, commercial roof drain, roof drain, roof drain and overflow, roof drain sump pan, sump pan, roof drain pan
roof drain and overflow sump pan kit
JR Smith roof drain, roof drain detail, commercial roof drain, JR Smith roof drain and overflow
Jay R Smith combo roof drain

The main feature of the LCP roof drain sump pan that sets it apart from similar double sump receivers is the integrated “sump feature”.  This lowers the roof drains 2-1/2″ below deck. This feature is not engineered into a sump receiver or deck plate that are commonly supplied with a roof drain. 

The sump feature effectively makes the roof drains the lowest point on the flat roof. As such, gravity pushes the water into the roof drain and is conveyed to a terminal location.

The sump receiver leaves the roof drains at deck level or slightly higher. This means that your roofing material must be thick enough to slope toward the roof drain. If it doesn’t, pools of standing rainwater will result. 


LCP sump pan can be installed in as little as 20 -30 minutes as compared to 2 hours or more for the double sump receiver. Bear in mind that the double sump receiver flanges must be cut down to fit between joists that are 24″ on center. This adds more time to the process and removes metal that is necessary for the waterproofing process. If your joists are further apart than 24″ then the unit will probably fit but you still need to build a wood sump box. The lost production time makes this a liability.  

In the case where the roof has thick insulation, a sump are can often be formed from it and sump pan is not necessary.    

Therefore, it is ultimately more expensive than using the LCP roof drain sump pan by a factor of about 4 to 1. This means 4x faster jobsite production and 4x lower labor costs.

Prices are subject to change. Please consult the shopping cart for current pricing.   

Buy This System