Frank Pattern Sump Receiver



  • Take advantage of this introductory discount price!! Buy in quantity and SAVE up to 75% on our bundled shipping
  • Accepting advance orders…


Frank Pattern Sump Receiver

The Frank Pattern sump receiver is an extremely cost effective method to install a single roof drain. It is intended to be used on flat roofs that do not require a sump pan. All other roof drain brands have had a sump receiver available except this brand – until now. This is the only sump receiver made for the Frank Pattern roof drain.

WHAT are the installation applications?

  • The SSP sump receiver should be used on residential and light commercial applications.
  • Use a sump receiver when when your roof covering is at least one inch thick.
  • The sump receiver will fit between joists that are 16″ on center minimum, no modifications required.

SSP Roof Drain Sump Receiver Features…

  • SSP roof drain sump receiver accepts bottom and side outlet Frank Pattern roof drains
  • There are no field modifications required such as metal cutting or welding or reframing of the roof joists. The roof drain is bolted to the pan and they set in place in minutes. A SUPER time saver that can increase jobsite production.
  • The sump receiver dimensions are 18″ x 18″.
  • An underdeck clamp is not required.
  • All of the sump pans are fabricated and assembled on modern state of the art precision laser cutting equipment resulting in a perfect fit, EVERY TIME.
  • They are fabricated from 18 gauge galvanized steel and are available in stainless steel and aluminum.

Frank Pattern Roof Drain Features

  • Frank Pattern roof drain – bottom and side outlets, model numbers – 852N, 853N, 854N, 852SN, 853SN, 854SN
  • They have an 8-1/2″ diameter bowl and are available in 2″- 4″ outlet, no-hub pipe sizes.
  • Each roof drain has a combination protective gravel stop/membrane clamp (flashing ring) which compresses to make a water tight seal with a corrosion resistant Duco coating.
  • This roof drain has a dome or leaf grate that prevents debris from entering the roof drain. It twist locks into the membrane clamp for a secure connection.
  • Dome height is 6″ and will filter out debris
  • 100% cast iron construction
  • Frank Pattern roof drain detail


    • Higher grades of galvanized steel, stainless steel and aluminum.
    • Powder coating, painting or rubberized undercoating
    • Via special order.

Further, Once you use this kit, we think you will like the quality and ease of installation and hope you will visit us again! Leave us a comment.

We have some exciting new products coming to the website.  Check back often

SSP Super Saver 2,

  • We have new products arriving soon.
  • Several new roof drain sump pan models and new roof drain manufacturers will be available as well as installation videos.
  • Stay in the loop. Send us your contact info.  We NEVER give out your info without your permission.


tech support for roof drains sump pans      We Have Awesome Customer Service

  • Call and speak to our friendly and knowledgeable support staff.  M – F, 8 am to 5 pm, Pacific time USA 1888 900-9145 or (949) 317-0251.
  • Send us your plans/specs/drawings and photos.
  • We’re plumbing contractors so call us. We will help any way we can!!


Additional information

Weight 8 lbs
Dimensions 18 × 18 × 4 in


Pipe Size

2 inch, 3 inch, 4 inch


There are no reviews yet.

Be the first to review “Frank Pattern Sump Receiver”

Your email address will not be published.

You may also like…